At Wet Pour Patch Repair, we specialise in repairing damaged wet pour surfacing in Kent for schools, nurseries, councils, and leisure providers across the UK.

As safety surfacing must meet critical fall height standards, even small holes or cracks can compromise compliance.

Since play areas experience heavy use and changing weather, localised wear is common and best addressed early with patch repairs.

Request your no-obligation patch repair in Kent quote now.

What Is Involved in a Wet Pour Patch Repair in Kent ?

A wet pour patch repair in Kent involves removing the damaged or compromised section of surfacing, preparing the sub-base, and applying new EPDM granules mixed with polyurethane resin.

The patch is levelled and hand-trowelled to blend with the existing surface, ensuring it meets critical fall height requirements and remains slip-resistant.

As repairs are made with similar materials to the original surface, they help restore both the appearance and impact-absorbing performance.

What Are the Common Reasons for Patch Repairs in Kent?

Wet pour surfaces in Kent typically require patch repairs due to cracking, shrinking, lifting edges, or localised wear, especially in high-impact areas like beneath swings, slides, or climbing frames.

UV exposure, freeze-thaw cycles, or sub-base erosion can also lead to surface instability that requires targeted repair.

Since even small surface faults can create trip hazards or reduce safety compliance, timely patching is essential.

How Much Does Wet Pour Patch Repair Cost in Kent?

The cost for wet pour patch repair in Kent is £250 to £1,500.

The cost depends on the size of the area, surface thickness, and colour requirements.

Smaller areas (under 1m²) are generally low-cost, while repairs involving deeper surfacing or extensive preparation may cost more.

As each repair is site-specific, PE Sport Premium offers free assessments and detailed, no-obligation quotations.

Can the Patch Be Colour-Matched?

We aim to match the original surface colour as closely as possible using EPDM granules in the same or similar shades.

However, colour differences may occur due to weathering of the existing surface over time.

As we stock a wide range of colours, we make every effort to blend the patch discreetly with minimal visual difference.

How Long Does the Repair Take?

Most wet pour patch repairs can be completed within 1 day, depending on the size and site conditions.

The surface is usually safe to use 24 to 48 hours after repair, allowing the resin to cure fully.

Since our materials are fast-setting and weather-resistant, we minimise disruption and restore playground use quickly.

How Long Will a Wet Pour Patch in Kent Last?

When installed correctly using high-quality materials, a wet pour patch in Kent can last 5 to 10 years or more, depending on use and site conditions.

Patches in high-impact areas may wear faster but can be re-patched if needed.

As  we follow the same installation standards as full surfacing, our patches are made for long-term durability.

Can Multiple Areas Be Patched at Once?

Multiple patches can be repaired during a single visit, which is often more cost-effective for schools or councils managing several worn zones.

We assess the full surface during inspection and provide repair options for all affected areas.

Since preventative maintenance is key, addressing minor issues together can reduce future repair costs.

Can Safety Surfacing Be Repaired in Kent During Term Time?

Safety surfacing repairs in Kent can be carried out during term time, with works scheduled to minimise disruption to pupils and staff.

We can complete repairs outside of school hours, on weekends, or in phased sections to keep playgrounds partially open where possible.

As safety is our priority, we always secure work zones and ensure clear communication before and during the process.

Will the Repaired Area Match the Rest of the Surface?

Where possible, we match the colour, texture, and finish of the existing surface using the same type of material and binder.

For EPDM wet pour and bonded rubber mulch, we use granules from leading UK suppliers to ensure consistency in both colour and safety performance.

While minor shade differences can occur on aged surfaces, we aim for seamless integration whenever feasible.

Do You Need to Replace the Whole Surface?

In most cases we can complete targeted, localised repairs rather than replacing the full surface.

Full resurfacing is only necessary when damage is widespread or the sub-base has failed.

As partial repairs are more budget-friendly, they are often the best option for extending the life of an existing surface.

Is Safety Surfacing Repair in Kent Covered by Warranty?

In Kent, we provide a warranty on all repair work, covering workmanship and materials for a fixed period (details provided during quotation).

Our repairs are installed to the same standard as new surfaces, and we stand by their performance.

Since peace of mind matters, we also offer post-repair inspections to monitor performance over time.

What Happens If the Surface Can’t Be Repaired?

If the existing surface is beyond repair due to age, poor drainage, or sub-base failure, we may recommend resurfacing with a new layer of EPDM, bonded mulch, or artificial grass.

In these cases, we provide a clear breakdown of costs and options, helping you plan for a long-term, compliant replacement.

As we offer both repair and resurfacing in Kent, we always recommend the most cost-effective and appropriate solution for your needs.

What Is Involved in a Wet Pour Patch Repair?

A wet pour patch repair involves removing the damaged or compromised section of surfacing, preparing the sub-base, and applying new EPDM granules mixed with polyurethane resin.

The patch is levelled and hand-trowelled to blend with the existing surface, ensuring it meets critical fall height requirements and remains slip-resistant.

As repairs are made with similar materials to the original surface, they help restore both the appearance and impact-absorbing performance.

What Are the Common Reasons for Patch Repairs in Kent?

Wet pour surfaces typically require patch repairs in Kent due to cracking, shrinking, lifting edges, or localised wear, especially in high-impact areas like beneath swings, slides, or climbing frames.

UV exposure, freeze-thaw cycles, or sub-base erosion can also lead to surface instability that requires targeted repair.

Since even small surface faults can create trip hazards or reduce safety compliance, timely patching is essential.

For detailed advice, emergency repairs, or a free site inspection, contact Wet Pour Patch Repair in Kent.

Can Wet Pour Patch Repairs in Kent Be Done in Cold or Wet Weather?

Wet pour patch repairs require dry conditions and temperatures above 5°C for the resin to cure properly.

During colder months or periods of rain, we may need to postpone works or use weather protection measures.

As conditions directly affect the quality of the repair, we schedule patching at the earliest suitable opportunity.

Will the Repaired Area Be as Safe as the Original Surface?

When completed professionally, patch repairs in Kent restore the shock absorption and slip resistance of the original wet pour surface.

We ensure that all patches comply with BS EN 1177 critical fall height standards relevant to nearby play equipment.

Since safety is the main reason for patching, all work is completed to certified safety standards.

Do I Need to Close the Whole Playground During a Patch Repair in Kent?

Only the immediate area being repaired needs to be closed off while the work is completed and the surface cures.

We use clear signage and temporary fencing to isolate the repair zone, allowing other areas to remain accessible.

Because we work efficiently and with minimal disruption, playgrounds are usually reopened within 24 to 48 hours.

Can You Add New Colour or Graphics During a Patch Repair in Kent?

If desired, we can incorporate new colours or design features into the repaired area, particularly if a larger patch is required.

This is a great opportunity to refresh older surfacing or update play value without a full resurfacing project.

Because we offer custom EPDM colours and graphics, repairs can also enhance the look of your play area in Kent.

How Do I Prevent Future Damage to Wet Pour Surfaces in Kent?

In Kent, routine cleaning, inspections, and prompt minor repairs can significantly extend the life of your wet pour surface.

Avoiding water build-up through good drainage and keeping sharp objects or equipment with point loads off the surface will also help.

Since preventative care reduces long-term costs, we offer annual maintenance services tailored to your site.

How Do I Get a Free Site Survey in Kent?

For detailed advice, emergency repairs, or a free site inspection, contact Wet Pour Patch Repair in Kent. 

We provide nationwide safety surfacing repair services that keep your play areas compliant, attractive, and ready for everyday use.

Since wet pour is installed as a seamless system, patch repairs must be carried out professionally to ensure both safety performance and a visually consistent finish.

Safe play starts with strong surfaces, get your wet pour patch repair quote today.

Find More Info

Make sure you contact us today for a number of great wet pour patch repair services in Kent.

For more information on wet pour patch repair in Kent , fill in the contact form below to receive a free quote today.